Ford Trucks: Discussions

Free $25 gift certificate! . Be sure to come by to check out our store! Must be use toward in store purchase of DESIGNER CLOTHES CENTRAL only and not previous purchase OR combine with other discount. Thank you!

Minimum purchase must be $150 or higher. For example total purchase $150 - $25 (gift certificate) = you pay $125.

trendinfashion
DESIGNER CLOTHES CENTRAL -- UPTO 75% OFF

'Twas the night before Christmas, When all through the shop,
The lights where flickering, And my welder was hot,
The body hung over the suspension with care,
Hoping that Saint Nick will soon put a lift under there,

Closed my eyes and imagined being in bed,
But there where visions of pistons pounding in my head,
Now the welder has burnt my cap,
Letting me know I really need a nap,

From across the shop there arose such a shatter,
I ran right over to see what’s the matter,
There sat my windshield, with all that smashed glass,
I pulled the electrical chord too hard, sending tools into it in a mass,

Now I’m working on those bolts rusty and old,
Breaking my knuckles open on the steel so cold,
I bandage up and try again,
If it breaks, hope there’s an extra bolt in the can,

The truck bed filled with presents to be had,
If I don’t fix this, the kids will be really mad,
Running out of time, the clock is ticking away,
I probably should have done this yesterday,

I wipe the grease on my pants and shirt,
My head is pounding, it really does hurt,
Dawn has broke, kids are waking up,
I need to move this old pickup truck,

I put it all together and give it a try,
The effort brings a tear to my eye,
All this time busting my ass,
Turns out I was just out of gas.

here this is the issue i am having i am building a car for dependability but at the same time be able to drag race it all day and not break like alot of people at the drag strip that i have seen. what i want to know is which one is more dependable aluminum or cast iron cylinder heads. i have heard the aluminum flows better and it is easier to weld and so on but i have a pair of cast iron gt40 heads and and a pair of aluminum gt40 heads what i want to know is which one is more likely to break thank you for your time.
makrf-250

hi guys! i just bought an 87 ford f150 8 with 302 engine. the head gasket is leaking a bit, how much do you think on average to pay for the mechanic to fix it in labor if i buy the gasket myself? thank you.

Hey all, I am looking for 8' bed rails to fit 73-79 ford trucks, I have tried all the easy stuf like wrecking yards, Dennis Carpenter and LMC. If any boddy has some or has any ideas, how about a shout, or email me at Dbbigbennyb@aol.com, thanks for reading

Ok I have a stupid question but I was wondering if.

Would a ford rangers wiring harness(interior) be the same if it had power windows or roll up windows.
I was told that ford like other manufactures have one harness for both. They just don't use the wire connection if it has roll down windows and its not hooked up to the fuse block.
I just bought a ranger that needs a door replacement, it has roll down windows now. I figured that if the wire is there I can replace it with an electric window door.
I know it sounds dumb and I have my doubts but I figure I would get opinions from others that may know. my email address is bullelk22@hotmail.com
Thanks Tony

need a grill guard or bully bar crome