can't find exact specs on this amp.need to know 2 ohm stereo output,bridge 4 ohm output,and can bridged mode handle 2 ohm load.what was total output rated at?
Fultron was bought out by Memphis Audio. Thats probably why you cannot find info in Fultron. Basic rule of thumb for a 2 channel is as follows. -safe to assume it will play @ 2 ohms stereo -safe to assume it will play @ 4 ohms bridged -if the amp can play down to 1 ohm stereo which is rare, it should play down to 2 ohms bridged. -safe to assume in most cases, double your wattage output when you go from 4 ohms to 2 ohms stereo. It would help if you listed the model number of the amp and if there is any information labeled on the amp itself. That way more people will be able to respond and help you out with your question. Good luck.
That amp was released in the 90's. It will do 75 x 2 into 4 ohms. It is stable into 2 ohms stereo. Expect around 125 per channel into 2 ohms. Amp is stable down to 4 ohms only in bridged mode. Don't go any lower unless you want to replace it.
Must use Buy It Now and PayPal.
)
